SKF

According to foreign media reports, SKF introduced a new explorer high-speed single row angular contact ball bearings, , its performance is excellent, durable, for the screw compressor, pump and the gearbox of the designers and operators to provide many benefits, help to improve product reliability and energy efficiency, thus reduce the total cost of ownership of the device.

Compared with the preceding paragraph, the equipment of copper cage after a new design, improve the effect of noise reduction, damping, more durable, the new bearing contact Angle of 40 degrees, the speed limit will be increased sharply to 30%.The bearing adopted new cage shape, also adopted a more solid brass material, in reduces the contact pressure of cage contact forces at the same time improve their strength, to ensure that has a high resistance to impact load and vibration tolerance. At the same time, the bearing can greatly improve its speed performance under bad working conditions.

In addition, the SKF also provided contact Angle of 25 degrees of high speed single row angular contact ball bearing products.Compared with the contact Angle of 40 degrees of bearing, the speed of 20%, further enhance the radial load .In all cases, the ball-to-cage contact arrangement makes the running time of the ball lower, the temperature stability is better, and the noise and vibration level of the above two products are reduced by 15%.This kind of bearing can be used to maintain more difficult applications and prevent the pollutants from entering the bearing interior during installation and post-operation.

SKF of the high-speed single row angular contact ball bearing products provide two contact Angle device, contact Angle of 40 degrees respectively and 25 degrees, and the latter can be used as a back-up bearing the products mentioned in the preceding paragraph, ascend to higher axial load,  application robustness, prolong its service life.

SKF Explorer (SKF Explorer) bearing products thanks to the company for many years in bearing, tribology , metallurgy, lubricating oil and mechanical technology in the field of technology research and development and professional knowledge.

For screw compressor, pump and the gearbox of the designers and operators, the new version of 40 degrees and 25 degrees SKF explorer single row angular contact ball bearing products is a good choice, helps to achieve low operating temperature, improve energy efficiency and prolong the service life of bearing and so on many requirements, to make their products stand out in numerous competition on hands.